Pctv usb2 remote control problem

Sorry for my english I'm italian.....
Can anyone help me , I have this video card nideo and sound work properly but remote control don't want work.
I use em28xx driver my dmesg is
[121845.180490] em28xx: it's fine to use this driver but keep in mind that it will move
[121845.180492] em28xx:
[121845.180495] em28xx: proved to be stable
[121845.180497] em28xx #0: Alternate settings: 8
[121845.180499] em28xx #0: Alternate setting 0, max size= 0
[121845.180501] em28xx #0: Alternate setting 1, max size= 1024
[121845.180503] em28xx #0: Alternate setting 2, max size= 1448
[121845.180506] em28xx #0: Alternate setting 3, max size= 2048
[121845.180508] em28xx #0: Alternate setting 4, max size= 2304
[121845.180510] em28xx #0: Alternate setting 5, max size= 2580
[121845.180512] em28xx #0: Alternate setting 6, max size= 2892
[121845.180514] em28xx #0: Alternate setting 7, max size= 3072
[121845.210381] attach_inform: eeprom detected.
[121845.235177] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 08 02 10 00 1e 03 98 2a 6a 2e
[121845.235188] em28xx #0: i2c eeprom 10: 00 00 06 57 6e 00 00 00 8e 00 00 00 07 00 00 00
[121845.235197] em28xx #0: i2c eeprom 20: 16 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
[121845.235206] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 00 00 00 00 00 00
[121845.235215] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[121845.235224] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[121845.235233] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 2e 03 50 00 69 00
[121845.235242] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[121845.235251] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 20 00 47 00
[121845.235260] em28xx #0: i2c eeprom 90: 6d 00 62 00 48 00 00 00 2a 03 50 00 43 00 54 00
[121845.235269] em28xx #0: i2c eeprom a0: 56 00 20 00 55 00 53 00 42 00 32 00 20 00 50 00
[121845.235278] em28xx #0: i2c eeprom b0: 41 00 4c 00 2f 00 53 00 45 00 43 00 41 00 4d 00
[121845.235287] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[121845.235296] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[121845.235305] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[121845.235314] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 0c 22 17 38 02 7f 59 2d
[121845.235323] EEPROM ID= 0x9567eb1a
[121845.235325] Vendor/Product ID= 2304:0208
[121845.235327] AC97 audio (5 sample rates)
[121845.235329] 500mA max power
[121845.235331] Table at 0x06, strings=0x2a98, 0x2e6a, 0x0000
[121845.238294] tuner 0-0043: chip found @ 0x86 (em28xx #0)
[121845.238322] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
[121845.240417] tuner 0-0063: chip found @ 0xc6 (em28xx #0)
[121845.240444] attach inform (default): detected I2C address c6
[121845.240449] tuner 0x63: Configuration acknowledged
[121845.240452] tuner 0-0063: type set to 47 (LG NTSC (TAPE series))
[121845.264856] saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
[121845.294174] attach_inform: saa7113 detected.
[121845.295651] ir-kbd-i2c: probe 0x30 @ em28xx #0: no
[121845.295954] ir-kbd-i2c: probe 0x47 @ em28xx #0: yes
[121845.295983] attach_inform: IR detected ().
[121845.296028] input: i2c IR (EM28XX Pinn as /class/input/input55
[121845.296047] ir-kbd-i2c: i2c IR (EM28XX Pinn detected at i2c-0/0-0047/ir0 [em28xx #0]
[121845.296055] ir-kbd-i2c: ir_poll_key
[121845.310114] em28xx #0: found i2c device @ 0x4a [saa7113h]
[121845.320962] em28xx #0: found i2c device @ 0x86 [tda9887]
[121845.321462] i2c IR (EM28XX Pinn/ir: key 3f
[121845.322956] em28xx #0: found i2c device @ 0x8e [remote IR sensor]
[121845.326200] em28xx #0: found i2c device @ 0xa0 [eeprom]
[121845.333061] em28xx #0: found i2c device @ 0xc6 [tuner (analog)]
[121845.351012] em28xx #0: V4L2 device registered as /dev/video0
[121845.351018] em28xx #0: Found Pinnacle PCTV USB 2
[121845.419648] ir-kbd-i2c: ir_poll_key
[121845.420218] i2c IR (EM28XX Pinn/ir: key 3f
[121845.519383] ir-kbd-i2c: ir_poll_key
[121845.519964] i2c IR (EM28XX Pinn/ir: key 3f
[121845.619129] ir-kbd-i2c: ir_poll_key
[121845.619716] i2c IR (EM28XX Pinn/ir: key 3f
[121845.718875] ir-kbd-i2c: ir_poll_key
[121845.719466] i2c IR (EM28XX Pinn/ir: key 3f
[121845.818621] ir-kbd-i2c: ir_poll_key
[121845.819217] i2c IR (EM28XX Pinn/ir: key 3f
[121845.918370] ir-kbd-i2c: ir_poll_key
[121845.918965] i2c IR (EM28XX Pinn/ir: key 3f
[121846.018113] ir-kbd-i2c: ir_poll_key
[121846.018715] i2c IR (EM28XX Pinn/ir: key 3f
[121846.117860] ir-kbd-i2c: ir_poll_key
[121846.118465] i2c IR (EM28XX Pinn/ir: key 3f
any solution ?